docker: remove unused config options

2 files changed, 2 insertions, 2256 deletions

diff --git a/docker/php-fpm.conf b/docker/php-fpm.conf
index 99c039d..feccc47 100644
--- a/docker/php-fpm.conf
+++ b/docker/php-fpm.conf
@@ -1,413 +1,12 @@
-; Start a new pool named 'www'.
-; the variable $pool can be used in any directive and will be replaced by the
-; pool name ('www' here)
 [www]
-
-; Per pool prefix
-; It only applies on the following directives:
-; - 'access.log'
-; - 'slowlog'
-; - 'listen' (unixsocket)
-; - 'chroot'
-; - 'chdir'
-; - 'php_values'
-; - 'php_admin_values'
-; When not set, the global prefix (or /usr) applies instead.
-; Note: This directive can also be relative to the global prefix.
-; Default Value: none
-;prefix = /path/to/pools/$pool
-
-; Unix user/group of processes
-; Note: The user is mandatory. If the group is not set, the default user's group
-;       will be used.
 user = www-data
 group = www-data
-
-; The address on which to accept FastCGI requests.
-; Valid syntaxes are:
-;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
-;                            a specific port;
-;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
-;                            a specific port;
-;   'port'                 - to listen on a TCP socket to all addresses
-;                            (IPv6 and IPv4-mapped) on a specific port;
-;   '/path/to/unix/socket' - to listen on a unix socket.
-; Note: This value is mandatory.
 listen = /run/php/php7.0-fpm.sock
-
-; Set listen(2) backlog.
-; Default Value: 511 (-1 on FreeBSD and OpenBSD)
-;listen.backlog = 511
-
-; Set permissions for unix socket, if one is used. In Linux, read/write
-; permissions must be set in order to allow connections from a web server. Many
-; BSD-derived systems allow connections regardless of permissions.
-; Default Values: user and group are set as the running user
-;                 mode is set to 0660
 listen.owner = www-data
 listen.group = www-data
-;listen.mode = 0660
-; When POSIX Access Control Lists are supported you can set them using
-; these options, value is a comma separated list of user/group names.
-; When set, listen.owner and listen.group are ignored
-;listen.acl_users =
-;listen.acl_groups =
-
-; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
-; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
-; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
-; must be separated by a comma. If this value is left blank, connections will be
-; accepted from any ip address.
-; Default Value: any
-;listen.allowed_clients = 127.0.0.1
-
-; Specify the nice(2) priority to apply to the pool processes (only if set)
-; The value can vary from -19 (highest priority) to 20 (lower priority)
-; Note: - It will only work if the FPM master process is launched as root
-;       - The pool processes will inherit the master process priority
-;         unless it specified otherwise
-; Default Value: no set
-; process.priority = -19
-
-; Choose how the process manager will control the number of child processes.
-; Possible Values:
-;   static  - a fixed number (pm.max_children) of child processes;
-;   dynamic - the number of child processes are set dynamically based on the
-;             following directives. With this process management, there will be
-;             always at least 1 children.
-;             pm.max_children      - the maximum number of children that can
-;                                    be alive at the same time.
-;             pm.start_servers     - the number of children created on startup.
-;             pm.min_spare_servers - the minimum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is less than this
-;                                    number then some children will be created.
-;             pm.max_spare_servers - the maximum number of children in 'idle'
-;                                    state (waiting to process). If the number
-;                                    of 'idle' processes is greater than this
-;                                    number then some children will be killed.
-;  ondemand - no children are created at startup. Children will be forked when
-;             new requests will connect. The following parameter are used:
-;             pm.max_children           - the maximum number of children that
-;                                         can be alive at the same time.
-;             pm.process_idle_timeout   - The number of seconds after which
-;                                         an idle process will be killed.
-; Note: This value is mandatory.
 pm = dynamic
-
-; The number of child processes to be created when pm is set to 'static' and the
-; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
-; This value sets the limit on the number of simultaneous requests that will be
-; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
-; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
-; CGI. The below defaults are based on a server without much resources. Don't
-; forget to tweak pm.* to fit your needs.
-; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
-; Note: This value is mandatory.
 pm.max_children = 20
-
-; The number of child processes created on startup.
-; Note: Used only when pm is set to 'dynamic'
-; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
 pm.start_servers = 4
-
-; The desired minimum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
 pm.min_spare_servers = 4
-
-; The desired maximum number of idle server processes.
-; Note: Used only when pm is set to 'dynamic'
-; Note: Mandatory when pm is set to 'dynamic'
 pm.max_spare_servers = 8
-
-; The number of seconds after which an idle process will be killed.
-; Note: Used only when pm is set to 'ondemand'
-; Default Value: 10s
-;pm.process_idle_timeout = 10s;
-
-; The number of requests each child process should execute before respawning.
-; This can be useful to work around memory leaks in 3rd party libraries. For
-; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
-; Default Value: 0
-pm.max_requests = 10000
-
-; The URI to view the FPM status page. If this value is not set, no URI will be
-; recognized as a status page. It shows the following informations:
-;   pool                 - the name of the pool;
-;   process manager      - static, dynamic or ondemand;
-;   start time           - the date and time FPM has started;
-;   start since          - number of seconds since FPM has started;
-;   accepted conn        - the number of request accepted by the pool;
-;   listen queue         - the number of request in the queue of pending
-;                          connections (see backlog in listen(2));
-;   max listen queue     - the maximum number of requests in the queue
-;                          of pending connections since FPM has started;
-;   listen queue len     - the size of the socket queue of pending connections;
-;   idle processes       - the number of idle processes;
-;   active processes     - the number of active processes;
-;   total processes      - the number of idle + active processes;
-;   max active processes - the maximum number of active processes since FPM
-;                          has started;
-;   max children reached - number of times, the process limit has been reached,
-;                          when pm tries to start more children (works only for
-;                          pm 'dynamic' and 'ondemand');
-; Value are updated in real time.
-; Example output:
-;   pool:                 www
-;   process manager:      static
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          62636
-;   accepted conn:        190460
-;   listen queue:         0
-;   max listen queue:     1
-;   listen queue len:     42
-;   idle processes:       4
-;   active processes:     11
-;   total processes:      15
-;   max active processes: 12
-;   max children reached: 0
-;
-; By default the status page output is formatted as text/plain. Passing either
-; 'html', 'xml' or 'json' in the query string will return the corresponding
-; output syntax. Example:
-;   http://www.foo.bar/status
-;   http://www.foo.bar/status?json
-;   http://www.foo.bar/status?html
-;   http://www.foo.bar/status?xml
-;
-; By default the status page only outputs short status. Passing 'full' in the
-; query string will also return status for each pool process.
-; Example:
-;   http://www.foo.bar/status?full
-;   http://www.foo.bar/status?json&full
-;   http://www.foo.bar/status?html&full
-;   http://www.foo.bar/status?xml&full
-; The Full status returns for each process:
-;   pid                  - the PID of the process;
-;   state                - the state of the process (Idle, Running, ...);
-;   start time           - the date and time the process has started;
-;   start since          - the number of seconds since the process has started;
-;   requests             - the number of requests the process has served;
-;   request duration     - the duration in µs of the requests;
-;   request method       - the request method (GET, POST, ...);
-;   request URI          - the request URI with the query string;
-;   content length       - the content length of the request (only with POST);
-;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
-;   script               - the main script called (or '-' if not set);
-;   last request cpu     - the %cpu the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because CPU calculation is done when the request
-;                          processing has terminated;
-;   last request memory  - the max amount of memory the last request consumed
-;                          it's always 0 if the process is not in Idle state
-;                          because memory calculation is done when the request
-;                          processing has terminated;
-; If the process is in Idle state, then informations are related to the
-; last request the process has served. Otherwise informations are related to
-; the current request being served.
-; Example output:
-;   ************************
-;   pid:                  31330
-;   state:                Running
-;   start time:           01/Jul/2011:17:53:49 +0200
-;   start since:          63087
-;   requests:             12808
-;   request duration:     1250261
-;   request method:       GET
-;   request URI:          /test_mem.php?N=10000
-;   content length:       0
-;   user:                 -
-;   script:               /home/fat/web/docs/php/test_mem.php
-;   last request cpu:     0.00
-;   last request memory:  0
-;
-; Note: There is a real-time FPM status monitoring sample web page available
-;       It's available in: /usr/share/php/7.0/fpm/status.html
-;
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;pm.status_path = /status
-
-; The ping URI to call the monitoring page of FPM. If this value is not set, no
-; URI will be recognized as a ping page. This could be used to test from outside
-; that FPM is alive and responding, or to
-; - create a graph of FPM availability (rrd or such);
-; - remove a server from a group if it is not responding (load balancing);
-; - trigger alerts for the operating team (24/7).
-; Note: The value must start with a leading slash (/). The value can be
-;       anything, but it may not be a good idea to use the .php extension or it
-;       may conflict with a real PHP file.
-; Default Value: not set
-;ping.path = /ping
-
-; This directive may be used to customize the response of a ping request. The
-; response is formatted as text/plain with a 200 response code.
-; Default Value: pong
-;ping.response = pong
-
-; The access log file
-; Default: not set
-;access.log = log/$pool.access.log
-
-; The access log format.
-; The following syntax is allowed
-;  %%: the '%' character
-;  %C: %CPU used by the request
-;      it can accept the following format:
-;      - %{user}C for user CPU only
-;      - %{system}C for system CPU only
-;      - %{total}C  for user + system CPU (default)
-;  %d: time taken to serve the request
-;      it can accept the following format:
-;      - %{seconds}d (default)
-;      - %{miliseconds}d
-;      - %{mili}d
-;      - %{microseconds}d
-;      - %{micro}d
-;  %e: an environment variable (same as $_ENV or $_SERVER)
-;      it must be associated with embraces to specify the name of the env
-;      variable. Some exemples:
-;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
-;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
-;  %f: script filename
-;  %l: content-length of the request (for POST request only)
-;  %m: request method
-;  %M: peak of memory allocated by PHP
-;      it can accept the following format:
-;      - %{bytes}M (default)
-;      - %{kilobytes}M
-;      - %{kilo}M
-;      - %{megabytes}M
-;      - %{mega}M
-;  %n: pool name
-;  %o: output header
-;      it must be associated with embraces to specify the name of the header:
-;      - %{Content-Type}o
-;      - %{X-Powered-By}o
-;      - %{Transfert-Encoding}o
-;      - ....
-;  %p: PID of the child that serviced the request
-;  %P: PID of the parent of the child that serviced the request
-;  %q: the query string
-;  %Q: the '?' character if query string exists
-;  %r: the request URI (without the query string, see %q and %Q)
-;  %R: remote IP address
-;  %s: status (response code)
-;  %t: server time the request was received
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %T: time the log has been written (the request has finished)
-;      it can accept a strftime(3) format:
-;      %d/%b/%Y:%H:%M:%S %z (default)
-;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
-;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
-;  %u: remote user
-;
-; Default: "%R - %u %t \"%m %r\" %s"
-;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
-
-; The log file for slow requests
-; Default Value: not set
-; Note: slowlog is mandatory if request_slowlog_timeout is set
-;slowlog = log/$pool.log.slow
-
-; The timeout for serving a single request after which a PHP backtrace will be
-; dumped to the 'slowlog' file. A value of '0s' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_slowlog_timeout = 0
-
-; The timeout for serving a single request after which the worker process will
-; be killed. This option should be used when the 'max_execution_time' ini option
-; does not stop script execution for some reason. A value of '0' means 'off'.
-; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
-; Default Value: 0
-;request_terminate_timeout = 0
-
-; Set open file descriptor rlimit.
-; Default Value: system defined value
-;rlimit_files = 1024
-
-; Set max core size rlimit.
-; Possible Values: 'unlimited' or an integer greater or equal to 0
-; Default Value: system defined value
-;rlimit_core = 0
-
-; Chroot to this directory at the start. This value must be defined as an
-; absolute path. When this value is not set, chroot is not used.
-; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
-; of its subdirectories. If the pool prefix is not set, the global prefix
-; will be used instead.
-; Note: chrooting is a great security feature and should be used whenever
-;       possible. However, all PHP paths will be relative to the chroot
-;       (error_log, sessions.save_path, ...).
-; Default Value: not set
-;chroot =
-
-; Chdir to this directory at the start.
-; Note: relative path can be used.
-; Default Value: current directory or / when chroot
-;chdir = /var/www
-
-; Redirect worker stdout and stderr into main error log. If not set, stdout and
-; stderr will be redirected to /dev/null according to FastCGI specs.
-; Note: on highloaded environement, this can cause some delay in the page
-; process time (several ms).
-; Default Value: no
-;catch_workers_output = yes
-
-; Clear environment in FPM workers
-; Prevents arbitrary environment variables from reaching FPM worker processes
-; by clearing the environment in workers before env vars specified in this
-; pool configuration are added.
-; Setting to "no" will make all environment variables available to PHP code
-; via getenv(), $_ENV and $_SERVER.
-; Default Value: yes
-;clear_env = no
-
-; Limits the extensions of the main script FPM will allow to parse. This can
-; prevent configuration mistakes on the web server side. You should only limit
-; FPM to .php extensions to prevent malicious users to use other extensions to
-; exectute php code.
-; Note: set an empty value to allow all extensions.
-; Default Value: .php
-;security.limit_extensions = .php .php3 .php4 .php5 .php7
-
-; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
-; the current environment.
-; Default Value: clean env
-;env[HOSTNAME] = $HOSTNAME
-;env[PATH] = /usr/local/bin:/usr/bin:/bin
-;env[TMP] = /tmp
-;env[TMPDIR] = /tmp
-;env[TEMP] = /tmp
-
-; Additional php.ini defines, specific to this pool of workers. These settings
-; overwrite the values previously defined in the php.ini. The directives are the
-; same as the PHP SAPI:
-;   php_value/php_flag             - you can set classic ini defines which can
-;                                    be overwritten from PHP call 'ini_set'.
-;   php_admin_value/php_admin_flag - these directives won't be overwritten by
-;                                     PHP call 'ini_set'
-; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
-
-; Defining 'extension' will load the corresponding shared extension from
-; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
-; overwrite previously defined php.ini values, but will append the new value
-; instead.
-
-; Note: path INI options can be relative and will be expanded with the prefix
-; (pool, global or /usr)
-
-; Default Value: nothing is defined by default except the values in php.ini and
-;                specified at startup with the -d argument
-;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
-;php_flag[display_errors] = off
-;php_admin_value[error_log] = /var/log/fpm-php.www.log
-;php_admin_flag[log_errors] = on
-;php_admin_value[memory_limit] = 32M
+pm.max_requests = 10000
\ No newline at end of file
diff --git a/docker/php.ini b/docker/php.ini
index 71d35e5..2205c9b 100644
--- a/docker/php.ini
+++ b/docker/php.ini
@@ -1,1918 +1,65 @@
 [PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About php.ini   ;
-;;;;;;;;;;;;;;;;;;;
-; PHP's initialization file, generally called php.ini, is responsible for
-; configuring many of the aspects of PHP's behavior.
-
-; PHP attempts to find and load this configuration from a number of locations.
-; The following is a summary of its search order:
-; 1. SAPI module specific location.
-; 2. The PHPRC environment variable. (As of PHP 5.2.0)
-; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
-; 4. Current working directory (except CLI)
-; 5. The web server's directory (for SAPI modules), or directory of PHP
-; (otherwise in Windows)
-; 6. The directory from the --with-config-file-path compile time option, or the
-; Windows directory (C:\windows or C:\winnt)
-; See the PHP docs for more specific information.
-; http://php.net/configuration.file
-
-; The syntax of the file is extremely simple.  Whitespace and lines
-; beginning with a semicolon are silently ignored (as you probably guessed).
-; Section headers (e.g. [Foo]) are also silently ignored, even though
-; they might mean something in the future.
-
-; Directives following the section heading [PATH=/www/mysite] only
-; apply to PHP files in the /www/mysite directory.  Directives
-; following the section heading [HOST=www.example.com] only apply to
-; PHP files served from www.example.com.  Directives set in these
-; special sections cannot be overridden by user-defined INI files or
-; at runtime. Currently, [PATH=] and [HOST=] sections only work under
-; CGI/FastCGI.
-; http://php.net/ini.sections
-
-; Directives are specified using the following syntax:
-; directive = value
-; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
-; Directives are variables used to configure PHP or PHP extensions.
-; There is no name validation.  If PHP can't find an expected
-; directive because it is not set or is mistyped, a default value will be used.
-
-; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
-; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
-; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
-; previously set variable or directive (e.g. ${foo})
-
-; Expressions in the INI file are limited to bitwise operators and parentheses:
-; |  bitwise OR
-; ^  bitwise XOR
-; &  bitwise AND
-; ~  bitwise NOT
-; !  boolean NOT
-
-; Boolean flags can be turned on using the values 1, On, True or Yes.
-; They can be turned off using the values 0, Off, False or No.
-
-; An empty string can be denoted by simply not writing anything after the equal
-; sign, or by using the None keyword:
-
-;  foo =         ; sets foo to an empty string
-;  foo = None    ; sets foo to an empty string
-;  foo = "None"  ; sets foo to the string 'None'
-
-; If you use constants in your value, and these constants belong to a
-; dynamically loaded extension (either a PHP extension or a Zend extension),
-; you may only use these constants *after* the line that loads the extension.
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-; PHP comes packaged with two INI files. One that is recommended to be used
-; in production environments and one that is recommended to be used in
-; development environments.
-
-; php.ini-production contains settings which hold security, performance and
-; best practices at its core. But please be aware, these settings may break
-; compatibility with older or less security conscience applications. We
-; recommending using the production ini in production and testing environments.
-
-; php.ini-development is very similar to its production variant, except it is
-; much more verbose when it comes to errors. We recommend using the
-; development version only in development environments, as errors shown to
-; application users can inadvertently leak otherwise secure information.
-
-; This is php.ini-production INI file.
-
-;;;;;;;;;;;;;;;;;;;
-; Quick Reference ;
-;;;;;;;;;;;;;;;;;;;
-; The following are all the settings which are different in either the production
-; or development versions of the INIs with respect to PHP's default behavior.
-; Please see the actual settings later in the document for more details as to why
-; we recommend these changes in PHP's behavior.
-
-; display_errors
-;   Default Value: On
-;   Development Value: On
-;   Production Value: Off
-
-; display_startup_errors
-;   Default Value: Off
-;   Development Value: On
-;   Production Value: Off
-
-; error_reporting
-;   Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-;   Development Value: E_ALL
-;   Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; html_errors
-;   Default Value: On
-;   Development Value: On
-;   Production value: On
-
-; log_errors
-;   Default Value: Off
-;   Development Value: On
-;   Production Value: On
-
-; max_input_time
-;   Default Value: -1 (Unlimited)
-;   Development Value: 60 (60 seconds)
-;   Production Value: 60 (60 seconds)
-
-; output_buffering
-;   Default Value: Off
-;   Development Value: 4096
-;   Production Value: 4096
-
-; register_argc_argv
-;   Default Value: On
-;   Development Value: Off
-;   Production Value: Off
-
-; request_order
-;   Default Value: None
-;   Development Value: "GP"
-;   Production Value: "GP"
-
-; session.gc_divisor
-;   Default Value: 100
-;   Development Value: 1000
-;   Production Value: 1000
-
-; session.hash_bits_per_character
-;   Default Value: 4
-;   Development Value: 5
-;   Production Value: 5
-
-; short_open_tag
-;   Default Value: On
-;   Development Value: Off
-;   Production Value: Off
-
-; track_errors
-;   Default Value: Off
-;   Development Value: On
-;   Production Value: Off
-
-; url_rewriter.tags
-;   Default Value: "a=href,area=href,frame=src,form=,fieldset="
-;   Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-;   Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; variables_order
-;   Default Value: "EGPCS"
-;   Development Value: "GPCS"
-;   Production Value: "GPCS"
-
-;;;;;;;;;;;;;;;;;;;;
-; php.ini Options  ;
-;;;;;;;;;;;;;;;;;;;;
-; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
-;user_ini.filename = ".user.ini"
-
-; To disable this feature set this option to empty value
-;user_ini.filename =
-
-; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
-;user_ini.cache_ttl = 300
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-; http://php.net/engine
-engine = On
-
-; This directive determines whether or not PHP will recognize code between
-; <? and ?> tags as PHP source which should be processed as such. It is
-; generally recommended that <?php and ?> should be used and that this feature
-; should be disabled, as enabling it may result in issues when generating XML
-; documents, however this remains supported for backward compatibility reasons.
-; Note that this directive does not control the <?= shorthand tag, which can be
-; used regardless of this directive.
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/short-open-tag
 short_open_tag = Off
-
-; The number of significant digits displayed in floating point numbers.
-; http://php.net/precision
 precision = 14
-
-; Output buffering is a mechanism for controlling how much output data
-; (excluding headers and cookies) PHP should keep internally before pushing that
-; data to the client. If your application's output exceeds this setting, PHP
-; will send that data in chunks of roughly the size you specify.
-; Turning on this setting and managing its maximum buffer size can yield some
-; interesting side-effects depending on your application and web server.
-; You may be able to send headers and cookies after you've already sent output
-; through print or echo. You also may see performance benefits if your server is
-; emitting less packets due to buffered output versus PHP streaming the output
-; as it gets it. On production servers, 4096 bytes is a good setting for performance
-; reasons.
-; Note: Output buffering can also be controlled via Output Buffering Control
-;   functions.
-; Possible Values:
-;   On = Enabled and buffer is unlimited. (Use with caution)
-;   Off = Disabled
-;   Integer = Enables the buffer and sets its maximum size in bytes.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: Off
-; Development Value: 4096
-; Production Value: 4096
-; http://php.net/output-buffering
 output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function.  For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-;   directive. Instead, explicitly set the output handler using ob_start().
-;   Using this ini directive may cause problems unless you know what script
-;   is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-;   and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-; Note: output_handler must be empty if this is set 'On' !!!!
-;   Instead you must use zlib.output_handler.
-; http://php.net/output-handler
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-;   outputs chunks that are few hundreds bytes each as a result of
-;   compression. If you prefer a larger chunk size for better
-;   performance, enable output_buffering in addition.
-; Note: You need to use zlib.output_handler instead of the standard
-;   output_handler, or otherwise the output will be corrupted.
-; http://php.net/zlib.output-compression
 zlib.output_compression = Off
-
-; http://php.net/zlib.output-compression-level
-;zlib.output_compression_level = -1
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-; http://php.net/zlib.output-handler
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block.  This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block.  Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-; http://php.net/implicit-flush
-; Note: This directive is hardcoded to On for the CLI SAPI
 implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instantiated. A warning appears if the specified function is
-; not defined, or if the function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func =
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
 serialize_precision = 17
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below.  This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file.
-; http://php.net/open-basedir
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names.
-; http://php.net/disable-functions
 disable_functions = pcntl_alarm,pcntl_fork,pcntl_waitpid,pcntl_wait,pcntl_wifexited,pcntl_wifstopped,pcntl_wifsignaled,pcntl_wifcontinued,pcntl_wexitstatus,pcntl_wtermsig,pcntl_wstopsig,pcntl_signal,pcntl_signal_dispatch,pcntl_get_last_error,pcntl_strerror,pcntl_sigprocmask,pcntl_sigwaitinfo,pcntl_sigtimedwait,pcntl_exec,pcntl_getpriority,pcntl_setpriority,
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names.
-; http://php.net/disable-classes
-disable_classes =
-
-; Colors for Syntax Highlighting mode.  Anything that's acceptable in
-; <span style="color: ???????"> would work.
-; http://php.net/syntax-highlighting
-;highlight.string  = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.default = #0000BB
-;highlight.html    = #000000
-
-; If enabled, the request will be allowed to complete even if the user aborts
-; the request. Consider enabling it if executing long requests, which may end up
-; being interrupted by the user or a browser timing out. PHP's default behavior
-; is to disable this feature.
-; http://php.net/ignore-user-abort
-;ignore_user_abort = On
-
-; Determines the size of the realpath cache to be used by PHP. This value should
-; be increased on systems where PHP opens many files to reflect the quantity of
-; the file operations performed.
-; http://php.net/realpath-cache-size
-;realpath_cache_size = 4096k
-
-; Duration of time, in seconds for which to cache realpath information for a given
-; file or directory. For systems with rarely changing files, consider increasing this
-; value.
-; http://php.net/realpath-cache-ttl
-;realpath_cache_ttl = 120
-
-; Enables or disables the circular reference collector.
-; http://php.net/zend.enable-gc
 zend.enable_gc = On
-
-; If enabled, scripts may be written in encodings that are incompatible with
-; the scanner.  CP936, Big5, CP949 and Shift_JIS are the examples of such
-; encodings.  To use this feature, mbstring extension must be enabled.
-; Default: Off
-;zend.multibyte = Off
-
-; Allows to set the default encoding for the scripts.  This value will be used
-; unless "declare(encoding=...)" directive appears at the top of the script.
-; Only affects if zend.multibyte is set.
-; Default: ""
-;zend.script_encoding =
-
-;;;;;;;;;;;;;;;;;
-; Miscellaneous ;
-;;;;;;;;;;;;;;;;;
-
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header).  It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-; http://php.net/expose-php
 expose_php = Off
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-; Maximum execution time of each script, in seconds
-; http://php.net/max-execution-time
-; Note: This directive is hardcoded to 0 for the CLI SAPI
 max_execution_time = 30
-
-; Maximum amount of time each script may spend parsing request data. It's a good
-; idea to limit this time on productions servers in order to eliminate unexpectedly
-; long running scripts.
-; Note: This directive is hardcoded to -1 for the CLI SAPI
-; Default Value: -1 (Unlimited)
-; Development Value: 60 (60 seconds)
-; Production Value: 60 (60 seconds)
-; http://php.net/max-input-time
 max_input_time = 60
-
-; Maximum input variable nesting level
-; http://php.net/max-input-nesting-level
-;max_input_nesting_level = 64
-
-; How many GET/POST/COOKIE input variables may be accepted
-; max_input_vars = 1000
-
-; Maximum amount of memory a script may consume (128MB)
-; http://php.net/memory-limit
 memory_limit = 128M
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; This directive informs PHP of which errors, warnings and notices you would like
-; it to take action for. The recommended way of setting values for this
-; directive is through the use of the error level constants and bitwise
-; operators. The error level constants are below here for convenience as well as
-; some common settings and their meanings.
-; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
-; those related to E_NOTICE and E_STRICT, which together cover best practices and
-; recommended coding standards in PHP. For performance reasons, this is the
-; recommend error reporting setting. Your production server shouldn't be wasting
-; resources complaining about best practices and coding standards. That's what
-; development servers and development settings are for.
-; Note: The php.ini-development file has this setting as E_ALL. This
-; means it pretty much reports everything which is exactly what you want during
-; development and early testing.
-;
-; Error Level Constants:
-; E_ALL             - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
-; E_ERROR           - fatal run-time errors
-; E_RECOVERABLE_ERROR  - almost fatal run-time errors
-; E_WARNING         - run-time warnings (non-fatal errors)
-; E_PARSE           - compile-time parse errors
-; E_NOTICE          - run-time notices (these are warnings which often result
-;                     from a bug in your code, but it's possible that it was
-;                     intentional (e.g., using an uninitialized variable and
-;                     relying on the fact it is automatically initialized to an
-;                     empty string)
-; E_STRICT          - run-time notices, enable to have PHP suggest changes
-;                     to your code which will ensure the best interoperability
-;                     and forward compatibility of your code
-; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
-;                     initial startup
-; E_COMPILE_ERROR   - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR      - user-generated error message
-; E_USER_WARNING    - user-generated warning message
-; E_USER_NOTICE     - user-generated notice message
-; E_DEPRECATED      - warn about code that will not work in future versions
-;                     of PHP
-; E_USER_DEPRECATED - user-generated deprecation warnings
-;
-; Common Values:
-;   E_ALL (Show all errors, warnings and notices including coding standards.)
-;   E_ALL & ~E_NOTICE  (Show all errors, except for notices)
-;   E_ALL & ~E_NOTICE & ~E_STRICT  (Show all errors, except for notices and coding standards warnings.)
-;   E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR  (Show only errors)
-; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
-; Development Value: E_ALL
-; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
-; http://php.net/error-reporting
 error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
-
-; This directive controls whether or not and where PHP will output errors,
-; notices and warnings too. Error output is very useful during development, but
-; it could be very dangerous in production environments. Depending on the code
-; which is triggering the error, sensitive information could potentially leak
-; out of your application such as database usernames and passwords or worse.
-; For production environments, we recommend logging errors rather than
-; sending them to STDOUT.
-; Possible Values:
-;   Off = Do not display any errors
-;   stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
-;   On or stdout = Display errors to STDOUT
-; Default Value: On
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-errors
 display_errors = Off
-
-; The display of errors which occur during PHP's startup sequence are handled
-; separately from display_errors. PHP's default behavior is to suppress those
-; errors from clients. Turning the display of startup errors on can be useful in
-; debugging configuration problems. We strongly recommend you
-; set this to 'off' for production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/display-startup-errors
 display_startup_errors = Off
-
-; Besides displaying errors, PHP can also log errors to locations such as a
-; server-specific log, STDERR, or a location specified by the error_log
-; directive found below. While errors should not be displayed on productions
-; servers they should still be monitored and logging is a great way to do that.
-; Default Value: Off
-; Development Value: On
-; Production Value: On
-; http://php.net/log-errors
 log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-; http://php.net/log-errors-max-len
 log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line unless ignore_repeated_source is set true.
-; http://php.net/ignore-repeated-errors
 ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; source lines.
-; http://php.net/ignore-repeated-source
 ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-; http://php.net/report-memleaks
 report_memleaks = On
-
-; This setting is on by default.
-;report_zend_debug = 0
-
-; Store the last error/warning message in $php_errormsg (boolean). Setting this value
-; to On can assist in debugging and is appropriate for development servers. It should
-; however be disabled on production servers.
-; Default Value: Off
-; Development Value: On
-; Production Value: Off
-; http://php.net/track-errors
 track_errors = Off
-
-; Turn off normal error reporting and emit XML-RPC error XML
-; http://php.net/xmlrpc-errors
-;xmlrpc_errors = 0
-
-; An XML-RPC faultCode
-;xmlrpc_error_number = 0
-
-; When PHP displays or logs an error, it has the capability of formatting the
-; error message as HTML for easier reading. This directive controls whether
-; the error message is formatted as HTML or not.
-; Note: This directive is hardcoded to Off for the CLI SAPI
-; Default Value: On
-; Development Value: On
-; Production value: On
-; http://php.net/html-errors
 html_errors = On
-
-; If html_errors is set to On *and* docref_root is not empty, then PHP
-; produces clickable error messages that direct to a page describing the error
-; or function causing the error in detail.
-; You can download a copy of the PHP manual from http://php.net/docs
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot. PHP's default behavior is to leave these settings empty, in which
-; case no links to documentation are generated.
-; Note: Never use this feature for production boxes.
-; http://php.net/docref-root
-; Examples
-;docref_root = "/phpmanual/"
-
-; http://php.net/docref-ext
-;docref_ext = .html
-
-; String to output before an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-prepend-string
-; Example:
-;error_prepend_string = "<span style='color: #ff0000'>"
-
-; String to output after an error message. PHP's default behavior is to leave
-; this setting blank.
-; http://php.net/error-append-string
-; Example:
-;error_append_string = "</span>"
-
-; Log errors to specified file. PHP's default behavior is to leave this value
-; empty.
-; http://php.net/error-log
-; Example:
-;error_log = php_errors.log
-; Log errors to syslog (Event Log on Windows).
-;error_log = syslog
-
-;windows.show_crt_warning
-; Default value: 0
-; Development value: 0
-; Production value: 0
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-
-; The separator used in PHP generated URLs to separate arguments.
-; PHP's default setting is "&".
-; http://php.net/arg-separator.output
-; Example:
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; PHP's default setting is "&".
-; NOTE: Every character in this directive is considered as separator!
-; http://php.net/arg-separator.input
-; Example:
-;arg_separator.input = ";&"
-
-; This directive determines which super global arrays are registered when PHP
-; starts up. G,P,C,E & S are abbreviations for the following respective super
-; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
-; paid for the registration of these arrays and because ENV is not as commonly
-; used as the others, ENV is not recommended on productions servers. You
-; can still get access to the environment variables through getenv() should you
-; need to.
-; Default Value: "EGPCS"
-; Development Value: "GPCS"
-; Production Value: "GPCS";
-; http://php.net/variables-order
 variables_order = "GPCS"
-
-; This directive determines which super global data (G,P & C) should be
-; registered into the super global array REQUEST. If so, it also determines
-; the order in which that data is registered. The values for this directive
-; are specified in the same manner as the variables_order directive,
-; EXCEPT one. Leaving this value empty will cause PHP to use the value set
-; in the variables_order directive. It does not mean it will leave the super
-; globals array REQUEST empty.
-; Default Value: None
-; Development Value: "GP"
-; Production Value: "GP"
-; http://php.net/request-order
 request_order = "GP"
-
-; This directive determines whether PHP registers $argv & $argc each time it
-; runs. $argv contains an array of all the arguments passed to PHP when a script
-; is invoked. $argc contains an integer representing the number of arguments
-; that were passed when the script was invoked. These arrays are extremely
-; useful when running scripts from the command line. When this directive is
-; enabled, registering these variables consumes CPU cycles and memory each time
-; a script is executed. For performance reasons, this feature should be disabled
-; on production servers.
-; Note: This directive is hardcoded to On for the CLI SAPI
-; Default Value: On
-; Development Value: Off
-; Production Value: Off
-; http://php.net/register-argc-argv
 register_argc_argv = Off
-
-; When enabled, the ENV, REQUEST and SERVER variables are created when they're
-; first used (Just In Time) instead of when the script starts. If these
-; variables are not used within a script, having this directive on will result
-; in a performance gain. The PHP directive register_argc_argv must be disabled
-; for this directive to have any affect.
-; http://php.net/auto-globals-jit
 auto_globals_jit = On
-
-; Whether PHP will read the POST data.
-; This option is enabled by default.
-; Most likely, you won't want to disable this option globally. It causes $_POST
-; and $_FILES to always be empty; the only way you will be able to read the
-; POST data will be through the php://input stream wrapper. This can be useful
-; to proxy requests or to process the POST data in a memory efficient fashion.
-; http://php.net/enable-post-data-reading
-;enable_post_data_reading = Off
-
-; Maximum size of POST data that PHP will accept.
-; Its value may be 0 to disable the limit. It is ignored if POST data reading
-; is disabled through enable_post_data_reading.
-; http://php.net/post-max-size
 post_max_size = 10M
-
-; Automatically add files before PHP document.
-; http://php.net/auto-prepend-file
-auto_prepend_file =
-
-; Automatically add files after PHP document.
-; http://php.net/auto-append-file
-auto_append_file =
-
-; By default, PHP will output a media type using the Content-Type header. To
-; disable this, simply set it to be empty.
-;
-; PHP's built-in default media type is set to text/html.
-; http://php.net/default-mimetype
 default_mimetype = "text/html"
-
-; PHP's default character set is set to UTF-8.
-; http://php.net/default-charset
 default_charset = "UTF-8"
-
-; PHP internal character encoding is set to empty.
-; If empty, default_charset is used.
-; http://php.net/internal-encoding
-;internal_encoding =
-
-; PHP input character encoding is set to empty.
-; If empty, default_charset is used.
-; http://php.net/input-encoding
-;input_encoding =
-
-; PHP output character encoding is set to empty.
-; If empty, default_charset is used.
-; See also output_buffer.
-; http://php.net/output-encoding
-;output_encoding =
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/usr/share/php"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-;
-; PHP's default setting for include_path is ".;/path/to/php/pear"
-; http://php.net/include-path
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues.  The alternate is to use the
-; cgi.force_redirect configuration below
-; http://php.net/doc-root
-doc_root =
-
-; The directory under which PHP opens the script using /~username used only
-; if nonempty.
-; http://php.net/user-dir
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; http://php.net/extension-dir
-; extension_dir = "./"
-; On windows:
-; extension_dir = "ext"
-
-; Directory where the temporary files should be placed.
-; Defaults to the system default (see sys_get_temp_dir)
-; sys_temp_dir = "/tmp"
-
-; Whether or not to enable the dl() function.  The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-; http://php.net/enable-dl
 enable_dl = Off
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; http://php.net/cgi.force-redirect
-;cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request. PHP's default behavior is to disable this feature.
-;cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; http://php.net/cgi.redirect-status-env
-;cgi.redirect_status_env =
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix its paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is 1.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; http://php.net/cgi.fix-pathinfo
-;cgi.fix_pathinfo=1
-
-; if cgi.discard_path is enabled, the PHP CGI binary can safely be placed outside
-; of the web tree and people will not be able to circumvent .htaccess security.
-; http://php.net/cgi.dicard-path
-;cgi.discard_path=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; http://php.net/fastcgi.impersonate
-;fastcgi.impersonate = 1
-
-; Disable logging through FastCGI connection. PHP's default behavior is to enable
-; this feature.
-;fastcgi.logging = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If set to 0, PHP sends Status: header that
-; is supported by Apache. When this option is set to 1, PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-; http://php.net/cgi.rfc2616-headers
-;cgi.rfc2616_headers = 0
-
-; cgi.check_shebang_line controls whether CGI PHP checks for line starting with #!
-; (shebang) at the top of the running script. This line might be needed if the
-; script support running both as stand-alone script and via PHP CGI<. PHP in CGI
-; mode skips this line and ignores its content if this directive is turned on.
-; http://php.net/cgi.check-shebang-line
-;cgi.check_shebang_line=1
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-; http://php.net/file-uploads
 file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-; http://php.net/upload-tmp-dir
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-; http://php.net/upload-max-filesize
 upload_max_filesize = 8M
-
-; Maximum number of files that can be uploaded via a single request
 max_file_uploads = 20
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-fopen
 allow_url_fopen = On
-
-; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
-; http://php.net/allow-url-include
 allow_url_include = Off
-
-; Define the anonymous ftp password (your email address). PHP's default setting
-; for this is empty.
-; http://php.net/from
-;from="john@doe.com"
-
-; Define the User-Agent string. PHP's default setting for this is empty.
-; http://php.net/user-agent
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-; http://php.net/default-socket-timeout
 default_socket_timeout = 60
 
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; http://php.net/auto-detect-line-endings
-;auto_detect_line_endings = Off
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-;   extension=modulename.extension
-;
-; For example, on Windows:
-;
-;   extension=msql.dll
-;
-; ... or under UNIX:
-;
-;   extension=msql.so
-;
-; ... or with a path:
-;
-;   extension=/path/to/extension/msql.so
-;
-; If you only provide the name of the extension, PHP will look for it in its
-; default extension directory.
-;
-; Windows Extensions
-; Note that ODBC support is built in, so no dll is needed for it.
-; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5+)
-; extension folders as well as the separate PECL DLL download (PHP 5+).
-; Be sure to appropriately set the extension_dir directive.
-;
-;extension=php_bz2.dll
-;extension=php_curl.dll
-;extension=php_fileinfo.dll
-;extension=php_ftp.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_gmp.dll
-;extension=php_intl.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_ldap.dll
-;extension=php_mbstring.dll
-;extension=php_exif.dll      ; Must be after mbstring as it depends on it
-;extension=php_mysqli.dll
-;extension=php_oci8_12c.dll  ; Use with Oracle Database 12c Instant Client
-;extension=php_openssl.dll
-;extension=php_pdo_firebird.dll
-;extension=php_pdo_mysql.dll
-;extension=php_pdo_oci.dll
-;extension=php_pdo_odbc.dll
-;extension=php_pdo_pgsql.dll
-;extension=php_pdo_sqlite.dll
-;extension=php_pgsql.dll
-;extension=php_shmop.dll
-
-; The MIBS data available in the PHP distribution must be installed.
-; See http://www.php.net/manual/en/snmp.installation.php
-;extension=php_snmp.dll
-
-;extension=php_soap.dll
-;extension=php_sockets.dll
-;extension=php_sqlite3.dll
-;extension=php_tidy.dll
-;extension=php_xmlrpc.dll
-;extension=php_xsl.dll
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[CLI Server]
-; Whether the CLI web server uses ANSI color coding in its terminal output.
-cli_server.color = On
-
-[Date]
-; Defines the default timezone used by the date functions
-; http://php.net/date.timezone
-;date.timezone =
-
-; http://php.net/date.default-latitude
-;date.default_latitude = 31.7667
-
-; http://php.net/date.default-longitude
-;date.default_longitude = 35.2333
-
-; http://php.net/date.sunrise-zenith
-;date.sunrise_zenith = 90.583333
-
-; http://php.net/date.sunset-zenith
-;date.sunset_zenith = 90.583333
-
-[filter]
-; http://php.net/filter.default
-;filter.default = unsafe_raw
-
-; http://php.net/filter.default-flags
-;filter.default_flags =
-
-[iconv]
-; Use of this INI entry is deprecated, use global input_encoding instead.
-; If empty, default_charset or input_encoding or iconv.input_encoding is used.
-; The precedence is: default_charset < intput_encoding < iconv.input_encoding
-;iconv.input_encoding =
-
-; Use of this INI entry is deprecated, use global internal_encoding instead.
-; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
-; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
-;iconv.internal_encoding =
-
-; Use of this INI entry is deprecated, use global output_encoding instead.
-; If empty, default_charset or output_encoding or iconv.output_encoding is used.
-; The precedence is: default_charset < output_encoding < iconv.output_encoding
-; To use an output encoding conversion, iconv's output handler must be set
-; otherwise output encoding conversion cannot be performed.
-;iconv.output_encoding =
-
-[intl]
-;intl.default_locale =
-; This directive allows you to produce PHP errors when some error
-; happens within intl functions. The value is the level of the error produced.
-; Default is 0, which does not produce any errors.
-;intl.error_level = E_WARNING
-;intl.use_exceptions = 0
-
-[sqlite3]
-;sqlite3.extension_dir =
-
-[Pcre]
-;PCRE library backtracking limit.
-; http://php.net/pcre.backtrack-limit
-;pcre.backtrack_limit=100000
-
-;PCRE library recursion limit.
-;Please note that if you set this value to a high number you may consume all
-;the available process stack and eventually crash PHP (due to reaching the
-;stack size limit imposed by the Operating System).
-; http://php.net/pcre.recursion-limit
-;pcre.recursion_limit=100000
-
-;Enables or disables JIT compilation of patterns. This requires the PCRE
-;library to be compiled with JIT support.
-;pcre.jit=1
-
-[Pdo]
-; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
-; http://php.net/pdo-odbc.connection-pooling
-;pdo_odbc.connection_pooling=strict
-
-;pdo_odbc.db2_instance_name
-
-[Pdo_mysql]
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/pdo_mysql.cache_size
-pdo_mysql.cache_size = 2000
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/pdo_mysql.default-socket
-pdo_mysql.default_socket=
-
-[Phar]
-; http://php.net/phar.readonly
-;phar.readonly = On
-
-; http://php.net/phar.require-hash
-;phar.require_hash = On
-
-;phar.cache_list =
-
-[mail function]
-; For Win32 only.
-; http://php.net/smtp
-SMTP = localhost
-; http://php.net/smtp-port
-smtp_port = 25
-
-; For Win32 only.
-; http://php.net/sendmail-from
-;sendmail_from = me@example.com
-
-; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
-; http://php.net/sendmail-path
-;sendmail_path =
-
-; Force the addition of the specified parameters to be passed as extra parameters
-; to the sendmail binary. These parameters will always replace the value of
-; the 5th parameter to mail().
-;mail.force_extra_parameters =
-
-; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
-mail.add_x_header = On
-
-; The path to a log file that will log all mail() calls. Log entries include
-; the full path of the script, line number, To address and headers.
-;mail.log =
-; Log mail to syslog (Event Log on Windows).
-;mail.log = syslog
-
-[SQL]
-; http://php.net/sql.safe-mode
-sql.safe_mode = Off
-
-[ODBC]
-; http://php.net/odbc.default-db
-;odbc.default_db    =  Not yet implemented
-
-; http://php.net/odbc.default-user
-;odbc.default_user  =  Not yet implemented
-
-; http://php.net/odbc.default-pw
-;odbc.default_pw    =  Not yet implemented
-
-; Controls the ODBC cursor model.
-; Default: SQL_CURSOR_STATIC (default).
-;odbc.default_cursortype
-
-; Allow or prevent persistent links.
-; http://php.net/odbc.allow-persistent
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-; http://php.net/odbc.check-persistent
-odbc.check_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-; http://php.net/odbc.max-persistent
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-; http://php.net/odbc.max-links
-odbc.max_links = -1
-
-; Handling of LONG fields.  Returns number of bytes to variables.  0 means
-; passthru.
-; http://php.net/odbc.defaultlrl
-odbc.defaultlrl = 4096
-
-; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of odbc.defaultlrl and odbc.defaultbinmode
-; http://php.net/odbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-;birdstep.max_links = -1
-
-[Interbase]
-; Allow or prevent persistent links.
-ibase.allow_persistent = 1
-
-; Maximum number of persistent links.  -1 means no limit.
-ibase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-ibase.max_links = -1
-
-; Default database name for ibase_connect().
-;ibase.default_db =
-
-; Default username for ibase_connect().
-;ibase.default_user =
-
-; Default password for ibase_connect().
-;ibase.default_password =
-
-; Default charset for ibase_connect().
-;ibase.default_charset =
-
-; Default timestamp format.
-ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
-
-; Default date format.
-ibase.dateformat = "%Y-%m-%d"
-
-; Default time format.
-ibase.timeformat = "%H:%M:%S"
-
 [MySQLi]
-
-; Maximum number of persistent links.  -1 means no limit.
-; http://php.net/mysqli.max-persistent
 mysqli.max_persistent = -1
-
-; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
-; http://php.net/mysqli.allow_local_infile
-;mysqli.allow_local_infile = On
-
-; Allow or prevent persistent links.
-; http://php.net/mysqli.allow-persistent
 mysqli.allow_persistent = On
-
-; Maximum number of links.  -1 means no limit.
-; http://php.net/mysqli.max-links
 mysqli.max_links = -1
-
-; If mysqlnd is used: Number of cache slots for the internal result set cache
-; http://php.net/mysqli.cache_size
 mysqli.cache_size = 2000
-
-; Default port number for mysqli_connect().  If unset, mysqli_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
-; at MYSQL_PORT.
-; http://php.net/mysqli.default-port
 mysqli.default_port = 3306
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-; http://php.net/mysqli.default-socket
-mysqli.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-host
-mysqli.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-; http://php.net/mysqli.default-user
-mysqli.default_user =
-
-; Default password for mysqli_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-; http://php.net/mysqli.default-pw
-mysqli.default_pw =
-
-; Allow or prevent reconnect
 mysqli.reconnect = Off
 
-[mysqlnd]
-; Enable / Disable collection of general statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_statistics
-mysqlnd.collect_statistics = On
-
-; Enable / Disable collection of memory usage statistics by mysqlnd which can be
-; used to tune and monitor MySQL operations.
-; http://php.net/mysqlnd.collect_memory_statistics
-mysqlnd.collect_memory_statistics = Off
-
-; Records communication from all extensions using mysqlnd to the specified log
-; file.
-; http://php.net/mysqlnd.debug
-;mysqlnd.debug =
-
-; Defines which queries will be logged.
-; http://php.net/mysqlnd.log_mask
-;mysqlnd.log_mask = 0
-
-; Default size of the mysqlnd memory pool, which is used by result sets.
-; http://php.net/mysqlnd.mempool_default_size
-;mysqlnd.mempool_default_size = 16000
-
-; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
-; http://php.net/mysqlnd.net_cmd_buffer_size
-;mysqlnd.net_cmd_buffer_size = 2048
-
-; Size of a pre-allocated buffer used for reading data sent by the server in
-; bytes.
-; http://php.net/mysqlnd.net_read_buffer_size
-;mysqlnd.net_read_buffer_size = 32768
-
-; Timeout for network requests in seconds.
-; http://php.net/mysqlnd.net_read_timeout
-;mysqlnd.net_read_timeout = 31536000
-
-; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
-; key.
-; http://php.net/mysqlnd.sha256_server_public_key
-;mysqlnd.sha256_server_public_key =
-
-[OCI8]
-
-; Connection: Enables privileged connections using external
-; credentials (OCI_SYSOPER, OCI_SYSDBA)
-; http://php.net/oci8.privileged-connect
-;oci8.privileged_connect = Off
-
-; Connection: The maximum number of persistent OCI8 connections per
-; process. Using -1 means no limit.
-; http://php.net/oci8.max-persistent
-;oci8.max_persistent = -1
-
-; Connection: The maximum number of seconds a process is allowed to
-; maintain an idle persistent connection. Using -1 means idle
-; persistent connections will be maintained forever.
-; http://php.net/oci8.persistent-timeout
-;oci8.persistent_timeout = -1
-
-; Connection: The number of seconds that must pass before issuing a
-; ping during oci_pconnect() to check the connection validity. When
-; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
-; pings completely.
-; http://php.net/oci8.ping-interval
-;oci8.ping_interval = 60
-
-; Connection: Set this to a user chosen connection class to be used
-; for all pooled server requests with Oracle 11g Database Resident
-; Connection Pooling (DRCP).  To use DRCP, this value should be set to
-; the same string for all web servers running the same application,
-; the database pool must be configured, and the connection string must
-; specify to use a pooled server.
-;oci8.connection_class =
-
-; High Availability: Using On lets PHP receive Fast Application
-; Notification (FAN) events generated when a database node fails. The
-; database must also be configured to post FAN events.
-;oci8.events = Off
-
-; Tuning: This option enables statement caching, and specifies how
-; many statements to cache. Using 0 disables statement caching.
-; http://php.net/oci8.statement-cache-size
-;oci8.statement_cache_size = 20
-
-; Tuning: Enables statement prefetching and sets the default number of
-; rows that will be fetched automatically after statement execution.
-; http://php.net/oci8.default-prefetch
-;oci8.default_prefetch = 100
-
-; Compatibility. Using On means oci_close() will not close
-; oci_connect() and oci_new_connect() connections.
-; http://php.net/oci8.old-oci-close-semantics
-;oci8.old_oci_close_semantics = Off
-
-[PostgreSQL]
-; Allow or prevent persistent links.
-; http://php.net/pgsql.allow-persistent
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-; http://php.net/pgsql.auto-reset-persistent
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links.  -1 means no limit.
-; http://php.net/pgsql.max-persistent
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-; http://php.net/pgsql.max-links
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-; http://php.net/pgsql.ignore-notice
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Notice message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-; http://php.net/pgsql.log-notice
-pgsql.log_notice = 0
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-; http://php.net/bcmath.scale
-bcmath.scale = 0
-
-[browscap]
-; http://php.net/browscap
-;browscap = extra/browscap.ini
-
 [Session]
-; Handler used to store/retrieve data.
-; http://php.net/session.save-handler
 session.save_handler = files
-
-; Argument passed to save_handler.  In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;
-; The path can be defined as:
-;
-;     session.save_path = "N;/path"
-;
-; where N is an integer.  Instead of storing all the session files in
-; /path, what this will do is use subdirectories N-levels deep, and
-; store the session data in those directories.  This is useful if
-; your OS has problems with many files in one directory, and is
-; a more efficient layout for servers that handle many sessions.
-;
-; NOTE 1: PHP will not create this directory structure automatically.
-;         You can use the script in the ext/session dir for that purpose.
-; NOTE 2: See the section on garbage collection below if you choose to
-;         use subdirectories for session storage
-;
-; The file storage module creates files using mode 600 by default.
-; You can change that by using
-;
-;     session.save_path = "N;MODE;/path"
-;
-; where MODE is the octal representation of the mode. Note that this
-; does not overwrite the process's umask.
-; http://php.net/session.save-path
-;session.save_path = "/var/lib/php/sessions"
-
-; Whether to use strict session mode.
-; Strict session mode does not accept uninitialized session ID and regenerate
-; session ID if browser sends uninitialized session ID. Strict mode protects
-; applications from session fixation via session adoption vulnerability. It is
-; disabled by default for maximum compatibility, but enabling it is encouraged.
-; https://wiki.php.net/rfc/strict_sessions
 session.use_strict_mode = 0
-
-; Whether to use cookies.
-; http://php.net/session.use-cookies
 session.use_cookies = 1
-
-; http://php.net/session.cookie-secure
-;session.cookie_secure =
-
-; This option forces PHP to fetch and use a cookie for storing and maintaining
-; the session id. We encourage this operation as it's very helpful in combating
-; session hijacking when not specifying and managing your own session id. It is
-; not the be-all and end-all of session hijacking defense, but it's a good start.
-; http://php.net/session.use-only-cookies
 session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-; http://php.net/session.name
 session.name = PHPSESSID
-
-; Initialize session on request startup.
-; http://php.net/session.auto-start
 session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-; http://php.net/session.cookie-lifetime
 session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-; http://php.net/session.cookie-path
 session.cookie_path = /
-
-; The domain for which the cookie is valid.
-; http://php.net/session.cookie-domain
-session.cookie_domain =
-
-; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
-; http://php.net/session.cookie-httponly
-session.cookie_httponly =
-
-; Handler used to serialize data.  php is the standard serializer of PHP.
-; http://php.net/session.serialize-handler
 session.serialize_handler = php
-
-; Defines the probability that the 'garbage collection' process is started
-; on every session initialization. The probability is calculated by using
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator
-; and gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request.
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.gc-probability
 session.gc_probability = 0
-
-; Defines the probability that the 'garbage collection' process is started on every
-; session initialization. The probability is calculated by using the following equation:
-; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
-; session.gc_divisor is the denominator in the equation. Setting this value to 1
-; when the session.gc_divisor value is 100 will give you approximately a 1% chance
-; the gc will run on any give request. Increasing this value to 1000 will give you
-; a 0.1% chance the gc will run on any give request. For high volume production servers,
-; this is a more efficient approach.
-; Default Value: 100
-; Development Value: 1000
-; Production Value: 1000
-; http://php.net/session.gc-divisor
 session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-; http://php.net/session.gc-maxlifetime
 session.gc_maxlifetime = 1440
-
-; NOTE: If you are using the subdirectory option for storing session files
-;       (see session.save_path above), then garbage collection does *not*
-;       happen automatically.  You will need to do your own garbage
-;       collection through a shell script, cron entry, or some other method.
-;       For example, the following script would is the equivalent of
-;       setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
-;          find /path/to/sessions -cmin +24 -type f | xargs rm
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-; http://php.net/session.referer-check
-session.referer_check =
-
-; How many bytes to read from the file.
-; http://php.net/session.entropy-length
-;session.entropy_length = 32
-
-; Specified here to create the session id.
-; http://php.net/session.entropy-file
-; Defaults to /dev/urandom
-; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
-; If neither are found at compile time, the default is no entropy file.
-; On windows, setting the entropy_length setting will activate the
-; Windows random source (using the CryptoAPI)
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects
-; or leave this empty to avoid sending anti-caching headers.
-; http://php.net/session.cache-limiter
 session.cache_limiter = nocache
-
-; Document expires after n minutes.
-; http://php.net/session.cache-expire
 session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users' security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-;   to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-;   in publicly accessible computer.
-; - User may access your site with the same session ID
-;   always using URL stored in browser's history or bookmarks.
-; http://php.net/session.use-trans-sid
 session.use_trans_sid = 0
-
-; Select a hash function for use in generating session ids.
-; Possible Values
-;   0  (MD5 128 bits)
-;   1  (SHA-1 160 bits)
-; This option may also be set to the name of any hash function supported by
-; the hash extension. A list of available hashes is returned by the hash_algos()
-; function.
-; http://php.net/session.hash-function
 session.hash_function = 0
-
-; Define how many bits are stored in each character when converting
-; the binary hash data to something readable.
-; Possible values:
-;   4  (4 bits: 0-9, a-f)
-;   5  (5 bits: 0-9, a-v)
-;   6  (6 bits: 0-9, a-z, A-Z, "-", ",")
-; Default Value: 4
-; Development Value: 5
-; Production Value: 5
-; http://php.net/session.hash-bits-per-character
 session.hash_bits_per_character = 5
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs.  If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-; Default Value: "a=href,area=href,frame=src,form=,fieldset="
-; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
-; http://php.net/url-rewriter.tags
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-; Enable upload progress tracking in $_SESSION
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.enabled
-;session.upload_progress.enabled = On
-
-; Cleanup the progress information as soon as all POST data has been read
-; (i.e. upload completed).
-; Default Value: On
-; Development Value: On
-; Production Value: On
-; http://php.net/session.upload-progress.cleanup
-;session.upload_progress.cleanup = On
-
-; A prefix used for the upload progress key in $_SESSION
-; Default Value: "upload_progress_"
-; Development Value: "upload_progress_"
-; Production Value: "upload_progress_"
-; http://php.net/session.upload-progress.prefix
-;session.upload_progress.prefix = "upload_progress_"
-
-; The index name (concatenated with the prefix) in $_SESSION
-; containing the upload progress information
-; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
-; http://php.net/session.upload-progress.name
-;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
-
-; How frequently the upload progress should be updated.
-; Given either in percentages (per-file), or in bytes
-; Default Value: "1%"
-; Development Value: "1%"
-; Production Value: "1%"
-; http://php.net/session.upload-progress.freq
-;session.upload_progress.freq =  "1%"
-
-; The minimum delay between updates, in seconds
-; Default Value: 1
-; Development Value: 1
-; Production Value: 1
-; http://php.net/session.upload-progress.min-freq
-;session.upload_progress.min_freq = "1"
-
-; Only write session data when session data is changed. Enabled by default.
-; http://php.net/session.lazy-write
-;session.lazy_write = On
-
-[Assertion]
-; Switch whether to compile assertions at all (to have no overhead at run-time)
-; -1: Do not compile at all
-;  0: Jump over assertion at run-time
-;  1: Execute assertions
-; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
-; Default Value: 1
-; Development Value: 1
-; Production Value: -1
-; http://php.net/zend.assertions
-zend.assertions = -1
-
-; Assert(expr); active by default.
-; http://php.net/assert.active
-;assert.active = On
-
-; Throw an AssertationException on failed assertions
-; http://php.net/assert.exception
-;assert.exception = On
-
-; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
-; http://php.net/assert.warning
-;assert.warning = On
-
-; Don't bail out by default.
-; http://php.net/assert.bail
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-; http://php.net/assert.callback
-;assert.callback = 0
-
-; Eval the expression with current error_reporting().  Set to true if you want
-; error_reporting(0) around the eval().
-; http://php.net/assert.quiet-eval
-;assert.quiet_eval = 0
-
-[COM]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-; http://php.net/com.typelib-file
-;com.typelib_file =
-
-; allow Distributed-COM calls
-; http://php.net/com.allow-dcom
-;com.allow_dcom = true
-
-; autoregister constants of a components typlib on com_load()
-; http://php.net/com.autoregister-typelib
-;com.autoregister_typelib = true
-
-; register constants casesensitive
-; http://php.net/com.autoregister-casesensitive
-;com.autoregister_casesensitive = false
-
-; show warnings on duplicate constant registrations
-; http://php.net/com.autoregister-verbose
-;com.autoregister_verbose = true
-
-; The default character set code-page to use when passing strings to and from COM objects.
-; Default: system ANSI code page
-;com.code_page=
-
-[mbstring]
-; language for internal character representation.
-; This affects mb_send_mail() and mbstring.detect_order.
-; http://php.net/mbstring.language
-;mbstring.language = Japanese
-
-; Use of this INI entry is deprecated, use global internal_encoding instead.
-; internal/script encoding.
-; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
-; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
-; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
-;mbstring.internal_encoding =
-
-; Use of this INI entry is deprecated, use global input_encoding instead.
-; http input encoding.
-; mbstring.encoding_traslation = On is needed to use this setting.
-; If empty, default_charset or input_encoding or mbstring.input is used.
-; The precedence is: default_charset < intput_encoding < mbsting.http_input
-; http://php.net/mbstring.http-input
-;mbstring.http_input =
-
-; Use of this INI entry is deprecated, use global output_encoding instead.
-; http output encoding.
-; mb_output_handler must be registered as output buffer to function.
-; If empty, default_charset or output_encoding or mbstring.http_output is used.
-; The precedence is: default_charset < output_encoding < mbstring.http_output
-; To use an output encoding conversion, mbstring's output handler must be set
-; otherwise output encoding conversion cannot be performed.
-; http://php.net/mbstring.http-output
-;mbstring.http_output =
-
-; enable automatic encoding translation according to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-;       portable libs/applications.
-; http://php.net/mbstring.encoding-translation
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; "auto" detect order is changed according to mbstring.language
-; http://php.net/mbstring.detect-order
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-; http://php.net/mbstring.substitute-character
-;mbstring.substitute_character = none
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-; http://php.net/mbstring.func-overload
-;mbstring.func_overload = 0
-
-; enable strict encoding detection.
-; Default: Off
-;mbstring.strict_detection = On
-
-; This directive specifies the regex pattern of content types for which mb_output_handler()
-; is activated.
-; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
-;mbstring.http_output_conv_mimetype=
-
-[gd]
-; Tell the jpeg decode to ignore warnings and try to create
-; a gd image. The warning will then be displayed as notices
-; disabled by default
-; http://php.net/gd.jpeg-ignore-warning
-;gd.jpeg_ignore_warning = 0
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-; http://php.net/exif.encode-unicode
-;exif.encode_unicode = ISO-8859-15
-
-; http://php.net/exif.decode-unicode-motorola
-;exif.decode_unicode_motorola = UCS-2BE
-
-; http://php.net/exif.decode-unicode-intel
-;exif.decode_unicode_intel    = UCS-2LE
-
-; http://php.net/exif.encode-jis
-;exif.encode_jis =
-
-; http://php.net/exif.decode-jis-motorola
-;exif.decode_jis_motorola = JIS
-
-; http://php.net/exif.decode-jis-intel
-;exif.decode_jis_intel    = JIS
-
-[Tidy]
-; The path to a default tidy configuration file to use when using tidy
-; http://php.net/tidy.default-config
-;tidy.default_config = /usr/local/lib/php/default.tcfg
-
-; Should tidy clean and repair output automatically?
-; WARNING: Do not use this option if you are generating non-html content
-; such as dynamic images
-; http://php.net/tidy.clean-output
-tidy.clean_output = Off
-
-[soap]
-; Enables or disables WSDL caching feature.
-; http://php.net/soap.wsdl-cache-enabled
-soap.wsdl_cache_enabled=1
-
-; Sets the directory name where SOAP extension will put cache files.
-; http://php.net/soap.wsdl-cache-dir
-soap.wsdl_cache_dir="/tmp"
-
-; (time to live) Sets the number of second while cached file will be used
-; instead of original one.
-; http://php.net/soap.wsdl-cache-ttl
-soap.wsdl_cache_ttl=86400
-
-; Sets the size of the cache limit. (Max. number of WSDL files to cache)
-soap.wsdl_cache_limit = 5
-
-[sysvshm]
-; A default size of the shared memory segment
-;sysvshm.init_mem = 10000
-
-[ldap]
-; Sets the maximum number of open links or -1 for unlimited.
-ldap.max_links = -1
-
-[mcrypt]
-; For more information about mcrypt settings see http://php.net/mcrypt-module-open
-
-; Directory where to load mcrypt algorithms
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.algorithms_dir=
-
-; Directory where to load mcrypt modes
-; Default: Compiled in into libmcrypt (usually /usr/local/lib/libmcrypt)
-;mcrypt.modes_dir=
-
-[dba]
-;dba.default_handler=
-
-[opcache]
-; Determines if Zend OPCache is enabled
-;opcache.enable=0
-
-; Determines if Zend OPCache is enabled for the CLI version of PHP
-;opcache.enable_cli=0
-
-; The OPcache shared memory storage size.
-;opcache.memory_consumption=64
-
-; The amount of memory for interned strings in Mbytes.
-;opcache.interned_strings_buffer=4
-
-; The maximum number of keys (scripts) in the OPcache hash table.
-; Only numbers between 200 and 1000000 are allowed.
-;opcache.max_accelerated_files=2000
-
-; The maximum percentage of "wasted" memory until a restart is scheduled.
-;opcache.max_wasted_percentage=5
-
-; When this directive is enabled, the OPcache appends the current working
-; directory to the script key, thus eliminating possible collisions between
-; files with the same name (basename). Disabling the directive improves
-; performance, but may break existing applications.
-;opcache.use_cwd=1
-
-; When disabled, you must reset the OPcache manually or restart the
-; webserver for changes to the filesystem to take effect.
-;opcache.validate_timestamps=1
-
-; How often (in seconds) to check file timestamps for changes to the shared
-; memory storage allocation. ("1" means validate once per second, but only
-; once per request. "0" means always validate)
-;opcache.revalidate_freq=2
-
-; Enables or disables file search in include_path optimization
-;opcache.revalidate_path=0
-
-; If disabled, all PHPDoc comments are dropped from the code to reduce the
-; size of the optimized code.
-;opcache.save_comments=1
-
-; If enabled, a fast shutdown sequence is used for the accelerated code
-; Depending on the used Memory Manager this may cause some incompatibilities.
-;opcache.fast_shutdown=0
-
-; Allow file existence override (file_exists, etc.) performance feature.
-;opcache.enable_file_override=0
-
-; A bitmask, where each bit enables or disables the appropriate OPcache
-; passes
-;opcache.optimization_level=0xffffffff
-
-;opcache.inherited_hack=1
-;opcache.dups_fix=0
-
-; The location of the OPcache blacklist file (wildcards allowed).
-; Each OPcache blacklist file is a text file that holds the names of files
-; that should not be accelerated. The file format is to add each filename
-; to a new line. The filename may be a full path or just a file prefix
-; (i.e., /var/www/x  blacklists all the files and directories in /var/www
-; that start with 'x'). Line starting with a ; are ignored (comments).
-;opcache.blacklist_filename=
-
-; Allows exclusion of large files from being cached. By default all files
-; are cached.
-;opcache.max_file_size=0
-
-; Check the cache checksum each N requests.
-; The default value of "0" means that the checks are disabled.
-;opcache.consistency_checks=0
-
-; How long to wait (in seconds) for a scheduled restart to begin if the cache
-; is not being accessed.
-;opcache.force_restart_timeout=180
-
-; OPcache error_log file name. Empty string assumes "stderr".
-;opcache.error_log=
-
-; All OPcache errors go to the Web server log.
-; By default, only fatal errors (level 0) or errors (level 1) are logged.
-; You can also enable warnings (level 2), info messages (level 3) or
-; debug messages (level 4).
-;opcache.log_verbosity_level=1
-
-; Preferred Shared Memory back-end. Leave empty and let the system decide.
-;opcache.preferred_memory_model=
-
-; Protect the shared memory from unexpected writing during script execution.
-; Useful for internal debugging only.
-;opcache.protect_memory=0
-
-; Allows calling OPcache API functions only from PHP scripts which path is
-; started from specified string. The default "" means no restriction
-;opcache.restrict_api=
-
-; Mapping base of shared memory segments (for Windows only). All the PHP
-; processes have to map shared memory into the same address space. This
-; directive allows to manually fix the "Unable to reattach to base address"
-; errors.
-;opcache.mmap_base=
-
-; Enables and sets the second level cache directory.
-; It should improve performance when SHM memory is full, at server restart or
-; SHM reset. The default "" disables file based caching.
-;opcache.file_cache=
-
-; Enables or disables opcode caching in shared memory.
-;opcache.file_cache_only=0
-
-; Enables or disables checksum validation when script loaded from file cache.
-;opcache.file_cache_consistency_checks=1
-
-; Implies opcache.file_cache_only=1 for a certain process that failed to
-; reattach to the shared memory (for Windows only). Explicitly enabled file
-; cache is required.
-;opcache.file_cache_fallback=1
-
-; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
-; This should improve performance, but requires appropriate OS configuration.
-;opcache.huge_code_pages=1
-
-; Validate cached file permissions.
-; opcache.validate_permission=0
-
-; Prevent name collisions in chroot'ed environment.
-; opcache.validate_root=0
-
-[curl]
-; A default value for the CURLOPT_CAINFO option. This is required to be an
-; absolute path.
-;curl.cainfo =
-
-[openssl]
-; The location of a Certificate Authority (CA) file on the local filesystem
-; to use when verifying the identity of SSL/TLS peers. Most users should
-; not specify a value for this directive as PHP will attempt to use the
-; OS-managed cert stores in its absence. If specified, this value may still
-; be overridden on a per-stream basis via the "cafile" SSL stream context
-; option.
-;openssl.cafile=
-
-; If openssl.cafile is not specified or if the CA file is not found, the
-; directory pointed to by openssl.capath is searched for a suitable
-; certificate. This value must be a correctly hashed certificate directory.
-; Most users should not specify a value for this directive as PHP will
-; attempt to use the OS-managed cert stores in its absence. If specified,
-; this value may still be overridden on a per-stream basis via the "capath"
-; SSL stream context option.
-;openssl.capath=
-
-; Local Variables:
-; tab-width: 4
-; End:
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
\ No newline at end of file